第95回フロンティア材料研究所講演会 (Prof. Gyoujin Cho)
開催日時 | 2019年01月31日 10:15 -11:15 |
---|---|
開催場所 | R3棟1F会議室 |
主催 | フロンティア材料研究所 |
連絡先 | Yutaka Majima e-mail: majima@msl.titech.ac.jp tel: 045-924-5309 |
プログラム等
講師: Prof. Gyoujin Cho
( Department of Printed Electronics Engineering, Sunchon National University )
演題: “Prospects in R2R gravure printed electronic devices for authentication”
Abstract:
As globalization in trading and online shopping become normal life to everyone via a smartphone, the counterfeit issue has been surged in high as well. Because of counterfeit goods and forged products, the estimated social cost was globally about $700 billion annually in 2012. That’s why anti-counterfeiting and authentication technologies have been developed based on the cost of the protection versus the value of the protected products. Therefore, up to present, there is no general anti-counterfeit technology that can apply from the high value added to the low value added products with a high security.
In this presentation, for the first time, the general anti-counterfeit technology was demonstrated by implementing an advanced additive technology such as a roll-to-roll gravure for manufacturing inexpensive Near Field Communication (NFC) cryptogram-label, generate codes with a designed frequency (0.1 to 30 Hz) via smartphone tagging and consequently connected to a blockchain to bring all information about the target product to the individual’s smartphone or do transaction to add data as an authentic ID. Since the printed NFC activated cryptogram-label cannot be easily duplicated, it can be used as the general anti-counterfeit technology with the high security by interconnecting with the blockchain technology.